The system composed of Charge Amplifier
-
VM-1980/3, simultaneous sampling unit
VM-0330/16,data record software ” Wave Stocker”
-
This is the really useful equipment which our Solution Team
developed using their experience obtained at their customer’ s site.
Simultaneous measurement by with sampling of max.16 channels is possible, enabling easy waveform analysis. This can be used for versatile tasks as the measurement at the site, inspection and R & D.
Software DS-0330 Specifications
|
Analysis Tools |
Functions |
Analysis 000 Data Record Tool
Concept : This is a tool for waveform data pre-processing.
The real time sampling data out of 16ch A/D unit are filed.
Data required for the function as of waveform monitoring, regeneration, analysis are outputted or filtered out. And original waveforms or FFT Analysis graphs for 16Ch are available. Measurements can be monitored in real time. This is an essential item to use other analysis tools. |
-
・Acquisition of 16ch.
Sampling output
-
・Text File Output
-
・Printing
-
・Data display between cursors
-
・Waveform monitoring
-
・Analysis Line number
-
・ME' scope record mode
-
・Triggering
-
・Data Recording
-
・FFT Real time monitoring
(Coherency, Transfer
Functions)
-
・Averaging
-
・Logger Record
-
・Window Functions
-
・Weighing of Filtering
-
・Data Saving
|
Analysis 001 Basic Analysis Tool
Concept : Used to make a quantitative comparison of data out of plural channels. This acts as a basic processing software to figure out the results of the analysis to be done later. |
-
・Frequency Analysis(FFT)
：i) Contour Figure
-
・3D Display
-
・Coherency
-
・Cross Correlation
-
・Transfer Function
-
・Lissajous
-
・Cross Spectrum
-
・Auto Correlation
|
Analysis 002 Transport Environment Analysis Tool
Concept : Industrial products are exposed to the vibration to predict damage in transportation and life or durability in use after sales. The test source and test conditions are settled basing upon the data of the actual transport environments. |
-
・Frequency Analysis(FFT) ：3D Display
-
・Grouping
-
・Cumulative Frequency Distribution
|
Analysis 003 Equipment Diagnosis Tool (1)
Concept : Used for detailed diagnosis of equipments, analysis evaluation for the trend management. |
-
・Harmonic Analysis
-
・Synchronous Averaging
-
・Probability Distribution
-
・Cumulative Frequency
Distribution
-
・Histogram
-
・Envelope
-
・S-V Plot
-
・FFT of Enveloping Result
-
・Moving Average
-
・Waveform Average
|
Analysis 004 Equipment Diagnosis Tool (2)
Concept : Judgment is visually possible by observation of analysis result. |
-
・Order Analysis
-
・Campbell Diagram
-
・Polar Diagram
-
・Cascade Diagram
|
＊Analysis 000 Data Record Tool is provided as standard. Other software are of option.
16 Channel Simultaneous Sampling Unit VM-0330/16 Specifications
|
Item |
Function |
|
Analog Input Function |
Voltage±10V
Input Combination：DC/AC（0.07Hz)
Constant Current：3mA On-Off Possible （for Amplifier build-in Sensor） |
|
A/D Converter Function |
Sampling Frequency：12.8kHz/ch（MAX）
Resolution:24bit |
|
Amplifier Function |
×1, ×5, ×10, ×20, ×50, ×100 |
|
Alarm Indication Function |
Over Range LED light-on (HOLD) |
|
Digital Input / Output Function |
2 Inputs, 2 Outputs |
|
Power Supply |
DC12V(Exclusive AC Adapter) |
|
Ambient Temperature / Humidity |
0～50℃ 20～80%RH |
|
Outward Size |
240(W)×150(D)×55(H)mm 1.6kg |
Charge Amplifier VM-1980 / 3 Hardware Specifications
|
Item |
Function |
|
Input Signal |
Piezoelectric Accelerometer |
|
Frequency Range |
0.4～20kHz |
|
Charge Sensitivity Setting Range |
0.01～999pC/(m/s2) |
|
Measurement Range |
3.3～66000m/s2（ for Charge Sensitivity 1.5pc/m2） |
|
Filter Freq. Characteristics |
Low Frequency Cut-off：Through、3Hz、10Hz（-18dB/0ct)
High Frequency Cut-off：Through、1kHz、10kHz（-18dB/0ct) |
|
Calibration Signal |
160Hz、±5V Sine Output
|
|
Alarm Indication Function |
Over Range: Red LED light-on (HOLD)
Under Range: Green LED On / Off （1second HOLD） |
|
Power Supply |
DC12V（Exclusive AC Adapter） |
|
Ambient Temperature / Humidity |
0～50℃ 20～80%RH |
|
Outward Size |
240(W)×150(D)×35(H)mm 0.6kg |
Share：
